Browse all practice questions for the Welding Theory Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Welding Theory Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which weld defect is primarily caused by gas entrapment from moisture or contamination?
  • Aside from detecting flaws, what is another capability of ultrasonic testing in welds?
  • Which option best describes the considerations when selecting a filler metal for welding dissimilar metals?
  • CAC stands for which cutting process?
  • Which practice helps minimize crevices and improve corrosion resistance in a welded joint?
  • The 1G pipe position is associated with which groove orientation?
  • CAC-A is the acronym for which cutting process?
  • Which term describes the distance the welding wire extends beyond the contact tip?
  • In a scenario where the circuit experiences an unintended connection between two nodes, the condition is called?
  • Which statement describes the relationship between 7018 and 6010?
  • Which term describes the symbol that indicates a uniform weld around all edges of a closed part?
  • Which electrode type goes in the hot box?
  • What is electrode extension, otherwise known as "stickout"?
  • Fires fueled by gasoline or oil would be extinguished with which type of fire extinguisher?
  • Which abbreviation would you expect to see on a schematic label indicating a potential fault between conductors?
  • What does the '-6' indicate in the GMAW electrode label ER70S-6?
  • The weld ____ is the point where the weld bead contacts the base metal surface.
  • Which joint configuration is formed when a flat plate is joined to another plate at a right angle, creating a perpendicular member?
  • The -B3 composition suffix means which composition?
  • The 1G position on pipe indicates which groove?
  • In radiographic testing, what is a pore or porosity defect in welded joints, and how is it detected?
  • Which statement best describes the heat-affected zone (HAZ) in welding and why its altered microstructure can promote cracking?
  • Submerged arc welding is not ideal for which welding position?
  • Solidification cracking occurs during which weld stage and is primarily caused by what conditions?
  • Which finish symbol represents Grinding?
  • The -1 suffix in E71T-1 indicates chemical composition; which encoding represents carbon steel?
  • Which element is represented by the symbol Cr?
  • Which factor is not typically considered when planning robotic welding?
  • Crater cracking occurs when?
  • Spray transfer in GMAW uses what characteristics?
  • Which practice is most effective in preventing porosity caused by moisture or flux contamination?
  • In an electrode label, what does B3 denote?
  • In GMAW, differentiate short-circuit transfer and spray transfer in terms of current, section thickness, and deposition.
  • Which symbol represents the element Silicon?
  • Which statement best describes the 4G plate position?
  • What is the practical difference in typical applications between E6010 and E7018 electrodes?
  • In pipe welding, which position corresponds to a standing, fixed pipe?
  • What is fit-up in welding and why is it important?
  • A CO2 arc welding shielding gas can break down in the welding arc and form carbon monoxide. Is this statement True or False?
  • SAW stands for which welding process?
  • What is ultrasonic testing (UT) used to detect in welds and how does it identify subsurface flaws?
  • SW stands for which welding process?
  • Compare shielded gas welding (GMAW/GTAW) to self-shielded flux-cored welding in terms of environment and quality.
  • What is the recommended stickout range for flux-core wire?
  • The -G composition suffix means what?
  • V stands for which element?
  • Which finish symbol indicates the weld should be machined after welding?
  • Which shielding gas can break down in the arc to form carbon monoxide?
  • PAC stands for which cutting process?
  • How do you interpret a weld symbol on a drawing to identify weld type, size, and location?
  • Which two positions are most commonly referenced for pipe welding?
  • SW is the acronym for which welding process?
  • Which AWS code is most commonly referenced for welding of structural steel, and what is its primary focus?
  • If a technician mentions adjusting CV to stabilize output, what property is being stabilized?
  • Which polarity is used for GMAW?
  • The space at the bottom of the joint between the pieces being welded is called the ____.
  • Mn stands for which element?
  • Which welding processes utilize shielding gas to protect the weld pool?
  • Which polarity is used for SMAW?
  • What is the AWS classification for a copper-based electrode with nickel?
  • CV stands for which term?
  • OFC stands for which cutting process?
  • In the FCAW electrode label E71T-1, what does the E represent?
  • OLC stands for which cutting method?
  • In a single-pass groove weld, how would you ensure proper penetration and fusion, and what bead-profile indications would you look for?
  • What is a common remedy for crater cracking at the end of a weld bead?
  • The 2G position on plate indicates which groove?
  • Which chemical element is represented by the symbol Cr?
  • The -1 suffix in E71T-1 indicates chemical composition; which encoding represents low-alloy steel?
  • How does interpass temperature influence cooling rate and the risk of cracking in multipass welds?
  • If a technician speaks of adjusting the CV setting on a welding power supply, what are they adjusting?
  • What is hydrogen-induced cracking (HIC) and under what welding conditions is it most likely to occur?
  • Which defect results from insufficient heat or poor weld pool bonding?
  • Which symbol represents the element Carbon?
  • Distinguish between solidification cracking and hydrogen-induced cracking, including when each occurs during welding?
  • Which statement accurately describes the impact of filler metal dilution on the weld metal properties?
  • The outer surface of the weld bead on the side the weld was made is called the weld ____.
  • Which suffix indicates 9% chromium with 1% Molly/vanadium?
  • What are the main causes of weld porosity and how can it be prevented?
  • In shielded metal arc welding, what are the functions of flux and how does slag affect weld quality?
  • Which statement correctly describes a Procedure Qualification Record (PQR)?
  • 7018 and 6010 are the same rod with different flux.
  • In the E71T-1 electrode designation, what does the T represent?
  • What does the 5G position indicate on pipe?
  • Which polarity is used for GTAW on ferrous metal?
  • How does shielding gas type influence weld penetration and bead shape in GMAW?
  • What is the primary function of shielding gas in welding?
  • Why is slag removal important in SAW?
  • GTAW (TIG) welding is preferred for which applications and why?
  • The symbol Fe corresponds to which element?
  • The -B9 suffix indicates which composition?
  • What is the significance of welding current type (AC vs DC) in SMAW and GMAW, and how does it affect arc stability?
  • IPM stands for which term?
  • On a lap-joint, the work angle is measured from a line perpendicular to the major, or nonbutting, surface to the plane containing the weld axis and the electrode axis. What is the term for this angle?
  • What are the two main FCAW flux-cored wire types and their typical applications?
  • The -B8 suffix indicates which composition?
  • The ____ symbol indicates that the same type weld joint is to be used on all continuous edges of a box or cylindrical part.
  • How does arc length affect heat input, penetration, and spatter in GMAW or SMAW?
  • Lap Joint
  • Ni stands for which element?
  • Which finish symbol represents Machining?
  • What is the primary purpose of preheating carbon steels before welding?
  • The weld _____ is the outer surface of the weld bead on the side the weld was made. What is this surface called?
  • SMAC stands for which cutting process?
  • What does the 6G position indicate on pipe?
  • The 1G position on plate indicates which groove?
  • In a documentation, CV is annotated to indicate what aspect of power supply?
  • Edge Joint
  • PAW is the abbreviation for which welding process?
  • What is the purpose of a welding fume extractor?
  • What do the AWS electrode designations E6010 and E7018 indicate?
  • Name four common weld joint configurations and indicate their typical uses.
  • What does the -1 suffix represent in the E71T-1 electrode designation?
  • Which test method is used to detect surface-breaking defects by applying penetrant material and a developer?
  • Which suffix indicates 9% chromium with 1% moly?
  • Why is controlling preheat and interpass temperature critical when welding high-carbon steels?
  • What term describes the distance between the centers of intermittent welds?
  • Which symbol represents the element Tin?
  • The -A1 composition suffix means which content?
  • For PAW (plasma arc welding), what shielding gas configuration is commonly used to maintain arc stability and control heat input?
  • How can welding affect corrosion resistance, and what strategies reduce corrosion in welded joints?
  • Where on a welding symbol can you find information about the welding process to use for the weld?
  • Which of the following is the correct meaning of IPM in manufacturing contexts?
  • Which polarity is used for FCAW?
  • What type of cracking is caused by hydrogen diffusion into steel during cooling and restraint?
  • What is the difference between a fillet weld and a groove weld, and when would you select each?
  • What is the purpose of post-weld heat treatment (PWHT), and in which materials is it typically required?
  • Which symbol represents the element Copper?
  • SC stands for which term?
  • Which element is associated with the symbol Ni?
  • The 3G position on plate indicates which groove?
  • What does the 'S' stand for in the GMAW electrode label ER70S-6?
  • In GTAW on non-ferrous metal, which polarity is used?
  • In relation to motor control, which acronym would describe the maximum rate of linear travel per minute?
  • In welding, which hazard is caused by magnetic fields causing the arc to wander?
  • Federal regulations for the legal storage, treatment, and disposal of hazardous waste are provided by which act?
  • What is the role of ASME Section IX in welding, and how does it relate to welding procedures and qualifications?
  • How do you determine weld metal and base metal compatibility to meet service requirements?
  • In MIG/MAG welding, what is the primary role of shielding gas?
  • SMAC is the acronym for which cutting process?
  • Which finish symbol indicates the requirement to machine the weld area?
  • Which finishing option describes the use of a lance to deliver oxygen for cutting?
  • How does the coefficient of thermal expansion influence weld design and fit-up for dissimilar metals?
  • What is the recommended interpass temperature guideline for high-strength steels during multi-pass welding?
  • In the GMAW electrode label ER70S-6, what does the R stand for?
  • In the E71T-1 electrode designation, what does the 1 represent?
  • PAW stands for which welding process?
  • In the GMAW electrode label ER70S-6, what does the E stand for?
  • What are the main features of submerged arc welding (SAW) and its limitations?
  • AAW stands for which welding process?
  • What are key considerations when welding aluminum and how do they differ from welding steel?
  • Which element is represented by the symbol Cu?
  • The center-to-center distance between intermittent welds is called the ____.
  • The finish symbol 'C' represents which operation?
  • GTAW is preferred for welding corrosion-resistant materials such as stainless steel and aluminum because of what?
  • Symbol that is used when 100% penetration is required on one-side welds.
  • The 4G position on plate indicates which groove?
  • Which component of a welding symbol carries information about the welding process to be used?
  • IPM is a unit describing rate of motion in which context?
  • In a device specification, which setting would be described as maintaining a steady voltage rather than a steady current?
  • Which option is not a valid plate groove designation?
  • IPM as a unit would most directly measure which type of quantity?
  • Are negative-pressure respirators recommended for filtering out toxic fumes in welding environments?
  • What is required to qualify a welding procedure according to AWS IX, and what is the difference between WPS and PQR?
  • Which FCAW wire type is used outdoors and for general structural welds because it does not require shielding gas?
  • In the E71T-1 electrode code, what does the 7 represent?
  • Which statement correctly differentiates welding from brazing?
  • How can hydrogen content in weld metal be controlled to reduce cold cracking risk?
  • In the E71T-1 code, which value indicates all-position welding?
  • How does weld sequencing influence distortion, and what pre-weld techniques help minimize distortion?
  • In the ER70S-6 label, the '-6' portion indicates which aspect?
  • Which chemical element is represented by the symbol Al?
  • CAC-A stands for which cutting process?
  • A joint formed by placing one piece of metal against another at a 90° angle is called a ____.
  • Which description correctly differentiates the 6G position from the 5G position?
  • In a ____, the edges of the two metals to be joined overlap. What is this joint called?
  • SMAW stands for Shielded Metal Arc Welding. What does SMAW stand for?
  • What advantages and limitations do robotic welding systems offer in manufacturing?
  • Sn stands for which element?
  • The ____ is the position of the electrode as it is tilted along the weld axis.
  • Socket welds are a type of which weld category?
  • What are the five standard welding positions defined by AWS, and which positions are most common for pipe welding?
  • Mo stands for which element?
  • In pipe welding, which position corresponds to a horizontal fixed pipe?
  • In brazing, which mechanism primarily draws the filler metal into the joint?
  • What preheat temperature would you typically apply for 1- to 1.5-inch thick carbon steel containing high carbon content to prevent cracking?
  • In the E71T-1 electrode designation, the position code 1 indicates which welding positions?
  • Which factor makes aluminum welding more challenging than steel welding?
  • SAW is the acronym for which welding process?
  • FW is an abbreviation used in welding terminology. What does it stand for?
  • Which joint is formed by two pieces meeting at roughly a 90-degree angle and welded at the intersection?
  • What is the recommended lens shade range for SMAW (Shielded Metal Arc Welding)?
  • In terms of crack risk, when is hydrogen-induced cracking most likely to occur?
  • PAC is the acronym for which cutting process?
  • Which symbol is used to indicate 100% penetration on one-side welds?
  • Name the five common nondestructive testing methods used to evaluate welds and indicate what each primarily detects.
  • Which suffix indicates a composition with 2 1/4% Cr and 1% Mo?
  • A welds ____ is the extent to which the weld metal combines with the base metal, as measured from the surface of the base metal.
  • What are common signs of distortion in welded assemblies, and how can it be mitigated?
  • C stands for which element?
  • In the E71T-1 electrode designation, the position code 0 corresponds to which welding positions?
  • Which type of extinguisher is typically used for fires involving flammable liquids?
  • Short circuit is abbreviated as which two-letter code?
  • Si stands for which element?
  • Which acronym is used to denote a fault condition where there is a direct connection between conductors?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy